STIHL MS 201 T C-M M-Tronic Arborist Gas Powered Chainsaw 14″ Bar 35.2 cc

MS 201 T C-M 14″ Bar

• • Benefits •
• • Description •
• • Specification •

• ✔ Dependable and fuel-efficient design

  ✔ Lightweight and User Friendly

  ✔ Superior power-to-weight ratio

• STIHL MS 201 T C-M Tree Chainsaw 14″ Bar, a clever engine management system that automatically responds to changes in environmental parameters such as fuel quality and altitude, comes standard on the industrious MS 201 T C-M. As a result, the machine is dependable and fuel-efficient, and it operates well in a variety of situations. The MS 201 T C-M offers maximum mobility and much-needed balance for in-tree cutting, thanks to a superior power-to-weight ratio and the inclusion of a top handle. You’ll be eager to tackle each major project that comes your way with “the ultimate arborist chainsaw.”

  Adjustable Automatic Oiler

  The Adjustable Automatic Oiler allows the user to adjust the lubricant of the guide bar and saw chain for different bar lengths and cutting conditions.

  STIHL Easy2Start™ (E)

  The STIHL Easy2Start™ system makes starting STIHL outdoor power tools almost effortless, eliminating the need for a strong pull of the starting cord. This advanced starting system is designed to make starting STIHL products easier. The specific system may vary by model, but in each case, a quick pull overcomes the engine’s compression to minimize the strength and effort required to start. Available on selected products.

  STIHL M-Tronic™

  This product features M-Tronic™ (M) – a new generation of Intelligent Engine Management that eliminates the low and high-speed carburetor adjustment screws, compensates for the dirty air filter, and changes in elevation and fuel quality for optimum engine power at all times.

  Side-Access Chain Tensioner

  The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.

  Translucent Fuel Tank

  Allows operator to easily check fuel level before starting work.

  STIHL Quickstop®

  STIHL chainsaws are equipped with a chain-stopping system designed to reduce the risk of injury in certain kickback situations. It is called a STIHL Quickstop® chain brake. The STIHL Quickstop® chain brake is designed to stop the rotation of the chain if activated by the operator’s hand or by inertia if the saw kicks back with sufficient force. In some working positions, the STIHL Quickstop® chain brake can be activated by inertia, stopping the chain within fractions of a second.

  Ematic™ Lubrication System

  The Ematic™ guide bar, when used with STIHL OILOMATIC® saw chain, will provide proper lubrication and less oil consumption than conventional methods. The system works because two ramps, strategically placed in the guide bar rail, help contain the flow of oil and direct all lubrication to the sliding faces of the bar and chain links as well as the rivets and driver holes, which in turn can reduce bar oil consumption up to 50%.

  Master Control Lever™

  The Master Control Lever™ is an easy-to-use single-lever, operating the choke, starting throttle lock, and on-off switch. The operator must pull the throttle trigger before moving the Master Control Lever™ to the choke position.

• MS 201 T C-M Specifications

  DISPLACEMENT 35.2 cc (2.15 cu. in.)

  ENGINE POWER 1.8 kW (2.41 bhp)

  POWERHEAD WEIGHT 3.71 kg (8.16 lbs.)

  FUEL CAPACITY 310 cc (10.5 oz.)

  CHAIN OIL CAPACITY 220 cc (7.4 oz.)

  OILOMATIC® CHAIN 3/8″ PS3

  GUIDE BAR LENGTHS (Recommended ranges) 30 to 40 cm (12″ to 16″)

  STIHL ROLLOMATIC® E or

  STIHL ROLLOMATIC® E Light

  POWER SOURCE Gas

  STIHL recommends #3616 (63 PS3 50) OILOMATIC® saw chain and 14″ 3005 000 7409 Ematic™ guide bar combination.